System expansions
► If any hard disk drives are already installed, remove them (see "Removing a hard disk", Page 57).
► If necessary, disconne ct the drive cables from the installation kit:
Press the catch to unlock it a nd press the cable retainer backwards out of the opening.
1
1
3
1
1
2
► Undo the screws (1) on the old insta llation kit.
► Slide the old i
nstallation kit in direction of the arrow (2).
► Take the old installation kit out of th e casing (3).
52 Fujitsu
To Next Page
Loading...
