System expan sio ns
1
3
2
3
3
3
► Insert the new installation kit into the casing (1).
► Slide the new assembly kit in direction of the arrow (2).
► Secure the new assembly kit with the screws (3).
► Insert the connecto rs of the basic configuration ca ble and the extension cable (if more
than 4 drives) at the respective slot, in the correct position.
► To ensure tha t the connectors engage correctly, a lways also push the locking lugs outwards.
► Reinstall the hard disk fan (see "
Install the hard disk fan", Page 69).
Fujitsu 53
To Next Page
Loading...
