Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the informat
ion provided in the "Safety/regulations" manual
andinthefollowingsafe
ty notes.
When installing and o pe
rating the device, please observe the notes on
environmental conditi
ons in Chapter "
Technical dat a", Page 98 as well as
the instructions in Cha
pter "
Getting started", Page 15.
When setting up the dev
ice, make sure there is clearance all around it so that
the casing receives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on areas of the monitor or the device.
You must only opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
Themainswitch(if
present) and the ON/OFF switch do not disconnect the
device from the ma
ins vo ltage. To completely disconnect from the mains
voltage, remove t
he power plug from the power socket.
Only op erate th
e device with the casing closed.
Replace the lit
hium battery on the mainboard in accordance with the instructions
in "
Repla cing t
he lithium battery", Page 97.
Caution, comp
onents in the system can get very hot.
The activiti
es described in these instructions must always be
performed wi
th the greatest care.
Repairs to th
e device must only be performed by q ualified technicians.
Incorrect r
epairs could put the user a t great risk or cause serious damage
to the equi
pment (electric shock, risk of fire).
Transpor
ting the device
Device,Tr ans po
rtation
Retrans
portation
Transport all parts separately in their original packaging or in a packag ing which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
12 Fujitsu