Fujitsu CELSIUS M770 - Screwing the Reader Onto the Module Holder

System expansio ns
► Push the module holder a few centimetres out of the casing in the direction of the arrow.
► Pull the mod ule holder completely out of the casing in the direction of the arrow.
Screwing the reader onto the module holder
2
2
a
a
1
► With the component side facing downwards,
slide the reader in the direction of arrow (1)
into the guide on the module holder (a).
► Fa sten the reader with the screw s size
M3x4.5 (2).
Fujitsu 59