System expansions
Installing and removing the accessible 5
1
/
4
inch drive
Installing an access ible dri
ve
To use the latch fu nction of the accessible 5
1
/
4
inch drive, you must fit the correspo ndin g
drive cover before inst alling the drive in the casing. Proceed as follows:
► Open the casing (see "
Open the casing", Page 43).
► Open the service door (se
e "
Open the service door", Page 45).
► If a blind cover is fitted, remove it.
Do not throw away the blind cover. If you remove the drive again later, y ou must
refit the blind cover for the purposes of cooling, fire protection and to prevent the
entry of foreign bodies (see "Remove accessible drive", page 61).
1
► R emove the drive plate from the bracket.
1
► Connec
t the drive plate to the drive (1).
70 Fujitsu
To Next Page
Loading...
