Getting started
Connecting extern al d e vices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before con necting external devices!
Do not connect or disconnect cables d uring a thunderstorm.
Always take hold of the actua l plug when disconnecting a cable. Never pull the cable!
To ensure that your device works properly, use only the supplied connection
cable or only use a high-quality connection cable.
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and ba ck of the device. The ports available on your
device depe nd on the config uration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the ma inboard.
Headphones, light green (back
of device) or bla ck (front of
device)
Headphones
Microphone port, pink (back of
device) or black (front of device)
Microphone jack
Audio output (L ine out), light
green
AudiooutputLineout
Audio input (Line in), light blue
AudioinputLinein
USB 3.1 - Universal Serial Bus,
Gen 1 Type A: blue, Gen 2
Type C
TM
:black
USB Type 3.0 - Universal Serial
Bus: black
USB Type 2.0 - Universal Serial
Bus: black
UniversalSerialBus
LAN port
LANport
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device a nd operating system).
Fujitsu 19
To Next Page
Loading...
