Operation
Indicators on the device
The indicators are on the front of the casing. Which indicators a re available on your
device depends on the configuration level you have selected.
1
3
4
2
No. ind icator Description
1
Indicator fo
r optional
components,
e.g.
SmartCard re
ader
The i ndicato
r lights up when optional components, e.g. SmartCard
reader, are a
ccessed.
2Driveindi
cators
The indicator lights up when the CD-ROM or DVD drive of the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
3 Power-on indicator
Caution:In energy saving mode, the device must not be
disconnected from the mains supply as this can cause loss of data.
• The indicator is illuminated:
The device is switched on.
•Theindicatorisflashing:
The device is in energy-saving mode. After being switched on
with the ON/O FF switch, the device pow ers up or returns to the
state it was in before it entered energy-saving mode.
• The indicator is not illuminated:
The device is s witch ed off (disconnected from the mains) or is
ready to operate. If the device is ready to operate, it can be
switched on with the O N/O F F switch.
4 Hard disk indicator The indicator lights up when the hard disk drive in the device
is being accessed.
28 Fujitsu
To Next Page
Loading...
