Fujitsu CELSIUS M770 - Remove the M.2 Module on the Front Panel Module (Optional)

System expansions
Remove the M.2 module on the front panel module (optional)
► Open the casing (see "Open the casing", Page 43).
► R emove the front panel module (see "
Removing the front panel module", Page 51).
b
a
1
2
► U ndo the screw (1).
► Pull the M.2 module (b) at a slight a ngle in the direction of the arrow (2) out
of the slot (a) on the front pan el module.
► Fo r safe keeping, secure the screw for retaining the M.2 module on one of the
associated stud bolts on the front panel module.
► In stall the front panel module (see "
Installing the front panel module", Page 53 ).
► C lose the casing (see "
Close the casing", Page 44).
If necessary, you must adjust the entry for the M.2 m odule accordingly in the BIOS Setup.
84 Fujitsu