System expansions
Installing/removing a 3½ inch or 2½ inch reader
(optional, SmartCard or Mult
iCard)
Operation of the module is not permitted in Taiwan.
You can for examp le insta
ll a SmartCard or MultiCard reader in the 3½ inch drive bay. The
reader is mounted onto a m
odule holder when installed in the casing.
SmartCard or MultiC ard
readers can be mounted on a module holder (optional).
If you have ordered a de
vice with a SmartCard or MultiCard reader, the m odule
holder, SmartCard or M
ultiCard reader are already built in on delivery.
Ifyouhaveorderedad
evice without a SmartCard or MultiCard reader, a
blind cover is insta
lled instead of the module holder.
Removing the module ho lder
► Open the casing (see "Open the casing", Page 43).
► Open the service door (see "
Open the service door", Page 45).
► D isconnect the cables connected to the module holder.
► R emove the screws on the module holder.
58 Fujitsu
To Next Page
Loading...
