System expansio ns
► Push the module holder a few centimetres out of the casing in the direction of the arrow.
► Pull the mod ule holder completely out of the casing in the direction of the arrow.
► Remove the reader from the module holder (see "
Removing the reader from
the module h older", Page 64 ) and reinstall the module holder (corresponds to
"
Installing a module holder with re ader", Page 60).
or
► Remove the reader from the module holder (see "
Removing the re ader from the
module h older", Page 64) and install a blind cover in the drive bay.
► Close the s
ervice d oor (see "
Close service door", Page 46).
► Close the casing (see "
Close the casing", Pag e 44).
Fujitsu 63
To Next Page
Loading...
