System expansio ns
► Remove the h a rd disk drive from the hard disk carrier (2).
► If you are not installing a new hard disk:
Keep the screws in the accessories kit so that they will not be lost.
Install the empty hard disk carrier in the casing (corresponds to installation of a hard disk
carrier with installed hard disk, see "
Installing a hard disk drive ", Page 78).
► Secure the hard disk cover (see "
Secure the hard disk cover", Page 55).
► On devices with a casing lock: Lock the casing.
► On devices without a casing lock but with ha rd disk cover lock: Lock the hard d isk
cover (see "
Mechanically lock the hard disk cover on devices without a casing lock",
Page 34) and close the casing (see "Open the casing", Page 43).
It may be necessary t o modify the entry for the drive in the BIOS Setup.
Fujitsu 77
To Next Page
Loading...
