System expansions
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.
2
1
3
► Slide the slot cover into the slot (1).
► Secure the slot cover with the screw (2), if one is provided.
► Fold the b oard lock (3) back down to close it.
► For long boards: Close the service door (see "
Close service door", Page 46).
► C lose the casing (see "
Close the casing", Page 44).
If you have installed o r removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
86 Fujitsu
To Next Page
Loading...
