Getting started
Settingupthedevice
WorkstationErgonomicDevice
When installing your device, please read the r eco mmendations and safety
notes in the "Safety/regulations" manual.
We recommend that you p lace your device on a surface which is not slippery. In
view of the m any different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39 " should b e maintained
from other devices on casing sides without ventilation su rfaces.
In order to avoid overheating, do not cover the ve ntilation areas
of the monitor or the device.
A minimum distance of 200 m m / 7.87" from th e device must be
observed for ventilation areas.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient cond itions (see "
Technical data", Pa ge 79,
section "Ambient conditions"). Protect the device against dust, humidity and he at.
Connecting the m achine to the mains
Mainsadapter,
2
1
► Connect the mains cable to the machine (1).
► Plug th
e mains plug into a three-pin socket (2).
Fujitsu 15
To Next Page
Loading...
