Getting started
Connecting a USB mouse
► Connect the USB m ouse to one of the USB ports on the device.
Connectinga USBmouseUSBport
Connecting a USB keyboard
Use only the keyboard cable supplied.
USBportC onnecting
► Plug the rectangular connector of th e keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Inser t the flat rectangula
r USB plug of the keyboard cable into a USB port of the device.
USBport
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect a wide range of external devices to the USB p orts (e.g.
printer, scanner, modem or keyb oard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cab
le to the external device.
► Connect the data cable to one of the USB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included
in the operating s ystem. If the device requires separate software, please
follow the instructions in the manufacturer ’s manual.
To ensure the transmission capacity of USB 2.0, the cable from the external USB
device to the USB port of your device must not be longer than 3 m.
18 Fujitsu
To Next Page
Loading...
