System expansions
2
1
► Place the drive cover on the casing (1).
► Slide the drive cover downward s (2) so that the drive cover clicks into the ca tche s.
► If you are not installing a new drive, reinstall the cover (optional) which was
previously removed. The drive bay must be closed off to ensure cooling, to protect
against fire and to prevent the entry of fo reign bodies.
► Close the casing (see "
Closing the casing" , Page 34).
It may be necessary to modify the entry for the drive in the BIOS Setup.
Installing
/removing a 3½" reader in a 3½" bay
(optional, SmartCard or MultiCard)
Operation
of the module is not permitted in Taiwan.
You can for instance install a SmartCa rd or MultiCard reader in the 3½" drive bay. The
reader is mounted onto a module holder when installed in the casing.
SmartCard or MultiCard readers can be mounted on a module holder (optional).
If you have ordered a device w ith a SmartCard or MultiCard reade r, the module
holder, SmartCard or MultiCard reader are already built in on delivery.
If you have ordered a device without a SmartCard or MultiCard re ader, a
blind cover is installed instead o f the module holder.
42 Fujitsu
To Next Page
Loading...
