System expansions
Installing a hard disk drive
• Requirement: remove the protective grille (see "Removing the protective grille", Page 57).
EasyChange rails for a second hard disk drive are mounted on the drive cage.
► Secure the E asyC hange rails on the side of the hard disk by inserting the upper pins
of the EasyChange rail in the corresponding holes on the hard disk.
1
► Slide the hard disk drive with the EasyChange rails into the drive ca ge in the direction of the
arrow (1). E nsure that the label on the 3½" hard disk drive is facing the side cover to be opened.
If you are installing a 2½" hard disk drive, ensure that the label is o n the top.
58 Fujitsu
To Next Page
Loading...
