System expansions
Installing an accessible drive
► Fit the d rive cover for the 5
1
/
4
inch drive (see "Fitting the drive cover for
the 5
1
/
4
inch drive", Page 39).
► If you have already fit ted a cover in the bay (optional), remove it.
Do not throw away the cover. For cooling and prote ction aga inst fire you must refitthe
cover if you remove the drive again later (see "
Removing an accessible drive", Page 41).
1
► Slide the acc
essible drive together with the attached drive metal plate into
thecasingun
til it engages (1).
► Connect th e cables to the drive. Make sure the polarity is correct.
► Close the c
asing (see "
Closing the casing" , Page 34).
It may be ne
cessary to modify th e entry for the drive in the BIOS Setup .
40 Fujitsu
To Next Page
Loading...
