System expansio ns
Mounting or replugging the cold plug master cable
In general, connectors P0 -P3 of the cold plug master cable are preassembled in slots EP0-EP3
of the standard assembly kit. Thus, four 3
1
/
2
" drives can be operated:
Assignment 1 Standard assembly kit:
EP0 / P0
EP1 / P1
EP2 / P2
EP3 / P3
EP4 EP5
EP6 EP7
Slot EP0 = Connector P0 (Boot-HDD)
Slot EP1 = Connector P1
Slot EP2 = Connector P2
Slot EP3 = Connector P3
Assignment 1 with c onnected con nectors:
Fujitsu 47
To Next Page
Loading...
