Getting started
Connecting a monitor
Use the monitor port of a graphics card in one of the board slots (1) to connect a monitor to your device.
1
1 = Monitor ports of the display adapte r
Only attach the monitor to your device when it is switched off.
Use only high-quality signal lines to connect the monitors. For the DVI interface,
we strongly recommend D V I monitor cable S26361-F2391-L400.
► Follow the instructions contained in the monitor manual to prepare the monitor
for ope ration (e.g . connecting c ables).
► Plug the data cable into a suitable m on itor port of the device.
Fujitsu 17
To Next Page
Loading...
