Getting started
Connecting external devices
Read the documentation o n the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not co nnect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Headphones jack, light green
Headphones
Microphone jack, pink
Microphonejack
Audio output (Line o ut), light green
AudiooutputLineout
Audio input (Line in), light blue
AudioinputLinein
USB 2.0 - Universal Serial Bus, black
USB 3.0 - U niversal Serial Bus, blue
UniversalS
erialBus
eSATA
eSATA port (optional)
eSATA
LAN port
LANport
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
16 Fujitsu
To Next Page
Loading...
