System expansions
Installing a new assembly kit (for expansion
from 4 to max. 8 drives)
If you wish to upgrade your device to u p to 8 drives, replace the standard assembly
kit C78 with the optional expansion assembly kit C76.
In addition to the cable for the basic configuration, you will also need an expa nsion cable.
Assignment of expansion a ssembly kit:
EP0 / P0
EP1 / P1
EP2 / P2
EP3 / P3
EP4 / P0*
EP5 / P1*
EP6 / P2*
EP7 / P3*
Assignment of expansion assembly kit with
connected connectors:
Basic configuration cable:
• Slot EP0 = Connector P0 (Boot-HDD)
• Slot EP1 = Connector P1
• Slot EP2 = Connector P2
• Slot EP3 = Connector P3
Expansion cable:
• Slot EP4 = Connector P0*
• Slot EP5 = Connector P1*
• Slot EP6 = Connector P2*
• Slot EP7 = Connector P3*
50 Fujitsu
To Next Page
Loading...
