System expansions
2
1
2
► Slide the drive into the drive carrier (1).
► Fasten the drive into place with
the screws (2).
1
2
2
► Push the drive carrier into the casing until the screw holes on the casing and the screw
holes on the drive carrier are directly one above the other (1).
► Secure the drive carrier with the screws (2).
► Connect th e cables to the drive. Make sure the polarity is correct.
► Close the casing (see "
Closing the casing" , Page 34).
It may be necessary to modify the entry for the drive in the BIOS Setup.
36 Fujitsu
To Next Page
Loading...
