(1) Set the required items and click the [Next >>] button.
A confirmation screen appears.
(2) Click the [OK] button.
The Thin Provisioning is set and the change completion screen appears.
(3) Click the [Done] button.
The [Register Advanced Copy License] screen appears.
5 Advanced Copy license registration
Click the [Skip] button to proceed to the [Setup Network Environment] screen.
6 Network environment setup
Set the ETERNUS DX environment for network communication.
Chapter 5 General Settings
5.4 Storage Management (Initial Setup 1)
65
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0
To Next Page
Loading...
