•
Do not uninstall the drives that are installed by default or move them to any other
slot.
Contact your sales representative or maintenance engineer if drives that are instal-
led by default need to be uninstalled or moved to another slot.
■
Global Hot Spare Registration
The procedure to register a Global Hot Spare is as follows:
1 Click the [Component] tab on the navigation of the ETERNUS Web GUI screen. On the [Component]
screen, click [Drives] in [Category].
The [Drives] screen appears.
2 Select the drive that is to be registered as the Global Hot Spare and click [Assign Global HS] in [Action].
A confirmation screen appears.
3 Click the [OK] button.
The Global Hot Spare is registered and the registration completion screen appears.
Chapter 5 General Settings
5.7 RAID Configuration Settings
79
FUJITSU Storage ETERNUS DX60 S3 Disk storage system
Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-9002-01ENZ0
To Next Page
Loading...
