Fujitsu Eternus DX90 - Page 100

Chapter 5 Installation
> 5.2 Rack Installation
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
100
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
Procedure
1 Refer to "ETERNUS DX60/DX80/DX90 Disk storage system Package Contents"
to confirm there are no missing parts for the rack mount kit.
2 Remove the two brackets temporarily attached to the AC outlet box.
Remove the two M3 screws from the front of the AC outlet box to free the brackets.
3 Attach the brackets and holders to the rack.
Refer
"ETERNUS DX60/DX80/DX90 Disk storage system Package Contents"
When the holes in the rack pillars are square, use the screw holders
to attach.
AC outlet box
Bracket B
Bracket A
M3 screw
M3 screw
(Rear rack pillars)
Bracket B
Screw
holders
M6 screws
Screw
holders
Bracket A
Holder
Holder
M6 screws