Chapter 7 Setup
> 7.3 Advanced Copy Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
168
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
7.3.2 Registering the Advanced Copy License Key
Register the license key according the following procedure.
Procedure
1 Register the Advanced Copy license key.
1-1 Start GUI.
1-2 Click the [Register Copy License] under the [Advanced Copy Management] menu on
the [Volume Settings] tab in the GUI screen.
The [Register Copy License] screen appears.
1-3 Input the obtained license key in the "License Key" field, and click the [Register Copy
License] button.
Figure 7.28 [Register Copy License] screen
A confirmation screen appears.
1-4 Click the [OK] button.
The Advanced Copy license is registered.
2 Check that the license key is registered.
2-1 Click the [Advanced Copy Status] menu on the [Status] tab of in the GUI screen.
The [Advanced Copy Status] screen appears.
2-2 Check that the "Advanced Copy License" is set to "Registered".
Figure 7.29 [Advanced Copy Status] screen
End of procedure
To Next Page
Loading...
