ETERNUS DX60/DX80/DX90 Disk storage system User Guide
201
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
Chapter 9 Operation and Maintenance
This chapter describes various operation, maintenance and troubleshooting related matters.
9.1 Checking the ETERNUS DX60/DX80/DX90 Status
Check the status of the ETERNUS DX60/DX80/DX90 regularly by checking its LEDs, or status
display function of GUI or CLI.
Also, setting the device monitoring enables e-mail notification message or SNMP trap message
of problems with the ETERNUS DX60/DX80/DX90.
Using remote report service enables automatic notification of hardware failure to remote mainte-
nance center and enables problems to be resolved quickly.
9.2 Backing up Data
In case of a system failure, important data should be regularly backed up to a tape drive or
similar device.
CAUTION
Do
• Impending trouble may be indicated by the warning message LEDs
of the ETERNUS DX60/DX80/DX90. The LEDs should be checked
regularly to prevent any serious trouble from occurring.
CAUTION
Do
• We recommend that you backup important data regularly.
If the ETERNUS DX60/DX80/DX90 fails and the data has not been
backed up, it may be lost.
To Next Page
Loading...
