Chapter 9 Operation and Maintenance
> 9.4 Post Start-of-Operation Changes to the Configuration
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
204
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
9.4.2 Replacing LAN Cards / iSCSI HBAs
The following explains how to replace a failed LAN card or iSCSI HBA.
Note that this is only an overview of the replacement procedure. Refer to the relevant manuals
for more details.
The procedure to replace a LAN card / iSCSI HBA is as follows:
Procedure
1 Turn off the server whose LAN card or iSCSI HBA is to be replaced.
2 Replace the LAN card / iSCSI HBA.
Refer to the documentation supplied with the LAN card or iSCSI HBA for the detailed
replacement procedure.
3 When the setting is complete, confirm that the server can access the ETERNUS
DX60/DX80.
End of procedure
Refer
User guide for LAN card / iSCSI HBA
"ETERNUS DX Disk storage systems Server Connection Guide (iSCSI)"
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
"ETERNUS DX60/DX80/DX90 CLI User Guide"
To Next Page
Loading...
