Fujitsu Eternus DX90 - Figure 7.30 [Setup Event Notification] Screen (Setting Based on Severity); Figure 7.31 [Setup Event Notification] Screen (Error Severity Level)

Chapter 7 Setup
> 7.4 Monitoring Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
170
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
2 Click [Setup Event Notification] under the [System Settings] menu on the [Global
Settings] tab in the GUI screen.
The [Setup Event Notification] screen appears.
3 Select the necessary items in "Setting based on Severity".
Figure 7.30 [Setup Event Notification] screen (Setting based on Severity)
4 Click the "Error Severity Level" link.
The [Error Severity Level] screen appears.
5 Select the necessary items in "Error Severity Level".
Figure 7.31 [Setup Event Notification] screen (Error Severity Level)