Chapter 7 Setup
> 7.2 Basic Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
146
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
■ For iSCSI
On the [Set iSCSI Port Parameters] screen, set the information for the connection
(detailed iSCSI port information) between the ETERNUS DX60/DX80 iSCSI port and the
server.
(1)Select a port and specify the necessary items in "Select Port", and click the [Next >]
button.
Figure 7.8 [Set iSCSI Port Parameters] screen
A confirmation screen appears.
(2)Click the [OK] button.
The port parameters are set, and the [Setup Network Environment] screen appears.
To Next Page
Loading...
