Chapter 7 Setup
> 7.2 Basic Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
142
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
2 Set date and time.
Set the date and time of the internal clock of the ETERNUS DX60/DX80/DX90.
2-1 Set the necessary parameters, and click the [Next >] button.
Figure 7.3 [Set Date and Time] screen
A confirmation screen appears.
2-2 Click the [OK] button.
The date and time setting is set, and the [Set Storage System Name] screen appears.
3 Set the machine name.
Set the name of ETERNUS DX60/DX80/DX90.
The information that is set here is used for network management by
SNMP. The device name is displayed in the logon screen and
operation screen of GUI.
To Next Page
Loading...
