Fujitsu Eternus DX90 - Figure 7.4 [Set Storage System Name] Screen; Figure 7.5 [Change Password] Screen

Chapter 7 Setup
> 7.2 Basic Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
143
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
3-1 Set the necessary parameters, and click the [Next >] button.
Figure 7.4 [Set Storage System Name] screen
A confirmation screen appears.
3-2 Click the [OK] button.
The machine name is set, and the [Change Password] screen appears.
4 Change the password.
Change the initial account password.
4-1 Set the necessary parameters in [Set Password], and click the [Next >] button.
Figure 7.5 [Change Password] screen
A confirmation screen appears.
4-2 Click the [OK] button.
The password is changed. For the ETERNUS DX60/DX80, go to Step 6
"Set the port
parameters". For the ETERNUS DX90, go to "Modify the FC Port Mode".