Fujitsu Eternus DX90 - Figure 7.13 [Create RAID Group] Screen

Chapter 7 Setup
> 7.2 Basic Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
152
Copyright 2010 FUJITSU LIMITED
P3AM-3042-06ENZ0
2-2 Set the necessary items, and click the [Create] button.
The following is a setting example when "Create RAID Group (Disks are assigned
automatically)" is selected.
Figure 7.13 [Create RAID Group] screen
A confirmation screen appears.
2-3 Click the [OK] button.
The RAID group is created, and the [Create Volume] screen appears.