Connecting external devices
Connecting an external monitor
The Port Replicator, available as an o ption for you r no tebook, offers
you a DVI port and a DisplayPort.
An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to
the DVI monitor port. Screen output is limited t o a m aximum of two screens at any one
time (see "
Key comb ination s", Page 43, section "Toggle output screen").
MonitorVGA connectionsock etScreenportMonitorport
Digital DVI monit
or port
Analogue VGA monitor port
► Sw itch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the no tebook.
You can also switch back and forth between the external monitor and the notebook’s
LCD monitor, see chapter "
Key combinations", Page 43.
You c an display the same picture on the external monitor and the
notebook LCD screen simultaneously.
98 Fujitsu Technology Solutions
To Next Page
Loading...
