Security functions
Brief overview of security functions
Detailed information about the security equipment of your device can be found
in the "Professional Notebook" m an ual, on the "Drivers & Utilities" CD/DVD
or on our website a t "
http://ts.fujitsu.com/suppor t/".
Security functions Typ e of protection
Preparation
Security Lock
Mechanical Fit and lock the Kensingto
n
Lock Cable (accessory).
Fingerprint sensor (depending
on the device)
Biometric
Install the supplied fingerprint
software.
BIOS password protection Password protection for BIOS
Setup, operating system and
hard disk with supervisor and
user password. T he passwords
consist of a maximum of eight
alphanumeric characters.
Specify at least one supervisor
password in the BIOS Setup
and activate the password
protection for the operating
system and hard disk as
desired.
Boot from removab
le media
Prevents unauthorised booting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive etc.).
In the BIOS Setup,
go to the
Security menu a nd
edit the
option Boot from
Removable
Media.
Owner Information Overlay service desk or owner
information during the boot
process.
In the BIOS Setup, go to the
Security menu a nd edit the
option Owner Information.
System Lock The BIOS and the system can
only be started with SmartCard
and PIN.
Initialise the SmartCard in the
BIOS.
SmartCard r
eader (device
dependent
)
PIN and Smar
tCard protec tion
for operat
ing sys tem
To use the Sm
artCard reader
functions
, install the supplied
(or other s
uitable) software.
Trusted P la tform Module
(device dependent)
Identification and authentication
of t he notebook
Define a supervisor passw ord
in the BIOS Setup and enable
the TPM (Security Chip).
Fujitsu Technology Solutions 77
To Next Page
Loading...
