Fujitsu LifeBook T901 - Key Combinations; Programming the Tablet Buttons

Working with the notebook
Key combinations
Key combinations cannot be changed.
You can find information on programming the tablet buttons in "
Prog ramming
the tablet buttons", P age 49.
Shortcut Meaning
4
+
A
1
Starting predefined application A
This button allows you to start a previously defined application.
By default, the button is preconfigu red to start the Launch Center application.
4
+
B
2
Starting predefined application B
This button allows you to start a previously defined application.
By default, the button is p reconfigured to start the Windows Journal
application.
4
+
3
Togg le o utpu t scree n
Use this key combination to select which screen(s) is/are used for display if
an external monitor is connected.
Screen output is possible:
• Monitor(s) connected to the notebook:
internal LCD screen -> only CRT (VGA) -> internal L CD screen +
CRT (VGA) -> only HDMI -> internal LCD screen + HDMI -> back to
beginning (internal LCD screen)
• Monitor(s) connected to the Port Replicator:
internal LCD screen -> only CRT (VGA) -> internal L CD screen + CRT
(VGA) -> only DVI > internal LCD screen + DVI -> only DisplayPort ->
internal LCD screen + DisplayPort -> only HDMI -> internal LCD screen
+ HDMI -> back to beginning (internal LCD screen)
The tablet b
utton
has a practical delay function: This allows you to press
the two but
tons for a shortcut one after the other instead of needing to press
them both at the same time. After pressing the
tablet but ton, you have a
short time (2 to 3 seconds) to press the second button.
Program
ming the tablet b uttons
You can program the tablet buttons to open a specific application or execute
a specific function when pressed.
Proceed as follows:
► In Control Panel, select the option to manage the se ttings for the tablet buttons and pen.
► Follo
w the instructions on the screen and program the tablet buttons as you r equire.
Fujitsu Technology Solutions 49