Working with the notebook
Replacing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can
scratch the screen. A da m aged or worn tip may not move freely over the screen,
causing unpredictable results when using the pen.
If your pen exhibits these problems, you should re place the pen tip. To do this, use the supplied tool (1).
1
► To remove the tip, position the tip in the gap
between the tw o ends of the tool supplied.
► Pinch the two en ds of the supplied tool
together so that the tip is firmly clasped,
then pu ll it from the barrel.
► Replace the tip of the pen with one of
the spare tips supplied with your pen.
Insert the flat end of the tip into th e
barrel and exerting gentle pressure, push
it in until it is firmly in place.
If the tip is worn or damaged, discard it.
Installin g a pen cord
Youshoulda
ttach the pen with a pen cord to prevent accidentally dropping or losing it.
► Attac h the e
nd of the pen cord with the smaller loop to your p en.
► Attach the end of the pen cord with the larger loop to your notebook.
Fujitsu Technology Solutions 37
To Next Page
Loading...
