Removing and installing components
during servicing
Attaching the cover
1
2
► Place the cover
in the correct mounting position (1).
► Tighten the screw (2).
Finishing component removal
After you ha
ve removed or changed th e system components as you requ ired, please
prepare you
r device fo r operation again as follows:
► In stall th
e battery ag ain (see "
Installing a battery", Page 53).
► Turn the notebook the right way up again and place it on a flat surface.
► R econnec
t the cables that you disconn ected before.
112 Fujitsu Technology Solutions
To Next Page
Loading...
