Working with the notebook
Inserting or removing a data carrier
InsertingRemoving
The noteboo k must be switched on.
2
1
► Push the insert/eject button (1).
The drive tray will open.
► Gently pull the drive tray (2) completely out.
► Place the data carrier in the drive tray with
the printed side fa cing upwards.
or
► Remove a data carrier that has
been inserted.
► Push in the drive t ray until you
feel it lock into place.
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergency r emovalofda tacarrier
In the event o
f a power failure or damage to the drive, you can remove the data carrier manually.
1
2
► Switch your
notebook off.
► Push a pen or a piece of wire (such as a
paperclip) firmly into the open ing (1).
The drive t
ray is ejected. You can now pull
the drive t
ray (2) out of the drive.
Fujitsu Technology Solutions 57
To Next Page
Loading...
