Fujitsu LifeBook T901 - The Cursor Does Not Correctly Follow the Pen Movements; Pen Input Not Working; The Notebook Cannot be Started

Troubleshooting and tips
The cursor d oes not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated Windows XP
► Calibrate the pe n as shown un
der Tablet
and Pen Settings in the Con
trol Pane l, see
"
Sett ing the pen", Pa ge 3
6
a
nd "
Calibrating
the pen", Page 36.
Windows 7
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "
Setting the pen", Page 36 and
"
Calibrating the pen", Page 36.
Pen input not working
Cause
Troubleshooting
Incorrect drive r installed.
► If your device is one which can only be
operated using the pen, install the driver for
the standard mod el.
or
► If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
The notebook cannot be started
Notebook
Cause Troublesho ot ing
The battery is not installed correctly.
► Check whether the battery is installed
correctly in its compartment.
► Switch th
e notebo ok on.
The batt
ery is dead.
► Ch arge the battery.
or
► Inser t
a charged battery.
or
► Connect the mains adapter to the
notebook.
The power adapter is not connected correctly.
► Chec
k whether the m ains adapter is
conn
ected correctly to the notebook.
► Switch the notebook on.
118 Fujitsu Technology Solutions