Working with the notebook
Connect the notebook to the port r eplicator
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
1
2
3
► Position the notebook on the port replicator in su ch a way that the docking connector on the
underside of the notebook is aligned with the docking connector of the port replicator as shown.
► Press down on the notebook’s rear corners so th at it locks into position.
► Connect the mains adapter cable to the DC jack (DC IN ) of the port replicator (1).
► Connect the power cable to the mains adapter (2).
► Plug the power cable into the mains so cket (3).
Fujitsu Technology Solutions 73
To Next Page
Loading...
