Connecting external devices
Connecting an external monitor to the DisplayPort
It is possible to connect a digital monitor to the DisplayPort on the port replicator.
Screen output is limited to a maximum of two screens at any one time (see "
Key
comb ination s", Pa ge 43, section "Toggle output scree n").
Digital DisplayPort
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor po rt.
► First switch on the external monitor and then the notebook.
You can also switch between the extern al monitor and the LCD monitor of the
notebook, see chapter "
Key combinat ions", Page 43.
You can display the same picture on the external monitor and the
notebook LCD m onitor simultaneously.
Fujitsu Technology Solutions 99
To Next Page
Loading...
