Working with the notebook
Removing and replacing the casing cover (ventilation
slot cover) to get rid of dust
To ensure optimum cooling of y our notebook’s components, you should clean
the ventilation slots of the cooling fan after prolonged use.
This ensures optimum fan performance. Best cleaning results are achieved
using a small hand-held vacuu m cleaner.
Ifnecessary,useadrybrushtoremovedustfromtheventilationslots.
Do not use any cleaning liquids! Ensure that liquid does not enter the device.
To avoid the device overheating, do not remove the ventilation slot
cover when the device is switched on.
► Prepare for removal, see chapter "
Prep aring to remove components", Page 106.
1
2
► Keep the locking tabs of the ventilation
slot cover pressed down (1).
► Lift the ventilation slot cover out
of the bay (2).
► Clean the dust chamber with a dry brush.
1
► Insert the ventilation slot cover into slot (1)
and ensure that you feel it click into place.
► Complete the remo val, see chapter
"
Finishing component removal", Page 112.
58 Fujitsu Technology Solutions
To Next Page
Loading...
