Security functions
SmartCard user grou ps
SmartCard
User groups can be set up using SystemLock. This enables several systems to be started with one
SmartCard. A user group consists of at least two systems. Each user that is allowed to s tart the
systems is provided w ith one SmartCard. The user can start any of the systems using this Sm artCard.
Basic information on setting up user groups
When installing SystemLock,thefirst PC in the user group is set up as a "Single PC". The
Admin SmartCard generated during this process is used to set up the u ser group. SystemLock
sets up each additional device a s a "Group PC" during installation. T he existing Admin
SmartCard is inserted, information is read in and the device is added to the user group.
The Admin SmartCard determines which user group the device belongs to.
If you use FSC-CardOS SmartCards, SystemLock can be administered via the Windows
program "SystemLock Admin". "SystemLock Admin" allows y ou to conveniently manage
SystemLock at the operating system level, create SystemLock Organisation Units a nd Groups,
generate SmartC ards for these Org anisation Units or Groups, assign access rights for user
cards at various levels and resto re access rights using remote access. You can also chang e
the SmartCard’s PIN or PUK for yourself and o the r users and reactivate blocked cards.
For a detailed description, see the " SystemLo ck Admin" Help manual.
Admin Card
PC1
Select System -
mode: F3
PC4
3
PC 1
Select System -
mode: F1
Smart Ca rd
PC1
Admin Card
PC1
1
2
PC2
Admin Car d
PC1
Select System -
mode: F3
3
PC3
Admin Card
PC1
3
User S
martCards or SuperUser SmartCards must still be generated using SystemLock so that
users
can access the systems within the user group. Using a User SmartCard or SuperUser
Smar
tCard a user c an log on to each system within the user group.
Fujitsu Technology Solutions 85
To Next Page
Loading...
