Removing and installing components
during servicing
Installing a memory m odule
2
a
1
► Insert the memory m odu le with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
► Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
2
2
1
► Place the cover into position, following the direction of the arrow (1).
► Secure the cover with the screws (2).
► In stall the b attery again (see "
Removing and installing the battery", Page 52).
► Turn the notebook the right way up again and place it on a flat surface.
► R eco nnect the cables that were previously disconnected.
108 Fujitsu Technology Solutions
To Next Page
Loading...
