Fujitsu M2488 - Power and Utility Information; Table 1-5. Power Requirements

M2488 USER’S GUIDE INTRODUCTION
April 1997 CG00000-011403 REV. A 1-7
* The 10-cartridge Support Base, M2488A41, adds 165 mm (6.5 inches) to the height and 5 kg (11 lbs.).
1-10 POWER AND UTILITY INFORMATION
Table 1-5 describes the power and utility requirements for the M2488.
ACL 5-cartridge Magazine
Dimensions:
Height 231 mm, 9.1 inches
Width 128 mm, 5 inches
Depth 139 mm, 5.5 inches
Weight 1 kg, 2.2 lbs without cartridges; 2.3 kg, 5.1 lbs with cartridges
Flush-mount Automatic Cartridge Loader (FACL)
Dimensions:
Height 254 mm, 10 inches
Width 217 mm, 8.5 inches
Depth 305 mm, 12 inches
Weight 11 kg, 24.3 lbs
FACL 7-cartridge Magazine
Dimensions:
Height 218 mm, 8.6 inches
Width 125 mm, 4.9 inches
Depth 126 mm, 5 inches
Weight 0.7 kg, 1.5 lbs without cartridges; 2.4 kg, 5.3 lbs with cartridges
Table 1-5. Power Requirements
SPECIFICATION REQUIREMENT
Input Voltage 100 to 120 VAC, single phase
200 to 240 VAC, single phase
Input Frequency 50 to 60 Hz
Input Current
100 to 125 VAC
200 to 240 VAC
2.6 A RMS
1.3 A RMS
Input Power 150 Watts maximum
Heat Dissipation 512 BTU/hour
Table 1-4. Equipment Description (Continued)
CHARACTERISTIC DESCRIPTION