M2488 USER’S GUIDE CONTROLS AND INDICATORS
April 1997 CG00000-011403 REV. A 3-5
3-3 AUTOMATIC CARTRIDGE LOADER CONTROLS AND INDICATORS
(OPTIONAL EQUIPMENT)
Figure 3-4 through Figure 3-6 and Table 3-4 through Table 3-6 illustrate and describe the controls and
indicators on the Automatic Cartridge Loader (ACL).
3-3.1 ACL Front Panel Controls and Indicators
Figure 3-4 and Table 3-4 illustrate and describe the front panel of the ACL.
Figure 3-4. ACL Front Panel Controls and Indicators
Table 3-4. ACL Front Panel Controls and Indicators
FIGURE AND
INDEX NO.
CONTROLS AND
INDICATORS
DESCRIPTION
3-4
1 Magazine Position Indicator Displays numbers and letters to indicate magazine positions
or state of the ACL.
2 SYSTEM LED Illuminates to indicate the ACL is in the SYSTEM mode.
3 MAGAZINE START LED Illuminates when a magazine is installed in the ACL and the
START
pushbutton has been pressed.
4 SEL LED Illuminates when the tape drive is selected on the SCSI bus.
5 ATTN LED When a mount/demount message is received from the host
system, the ATTN LED blinks to prompt the operator to
mount the cartridge/magazine.
6 Cartridge slot/magazine slot Holds a 5 or 10-cartridge magazine or provides an opening
to manually insert a cartridge.
7 Tape Position LEDs Indicates tape position between BOT and EOT. Lights illu-
minate sequentially in the forward direction (wrap 1) and
turn off sequentially in the reverse direction (wrap 2).
BOT EOT
ATTN.
SEL.
COMP.
1
SHIFT TEST START UNLOAD
RESET
7
8
9
10
11
12
1314
15
MAGAZINE
START
SYSTEM
AUTO
EJECT
MODE SEL.
6
2
3
4
5
16
17
To Next Page
Loading...
