INSTALLATION INSTRUCTIONS M2488 USER’S GUIDE
2-2 CG00000-011403 REV. A April 1997
2-3 CONFIGURATIONS
The M2488 tape drive may have a medium changer and be rack-mounted or placed on a desktop. The
desktop configurations are described in the following paragraphs.
There are three desktop configurations for the M2488 drive. Refer to Table 2-1 for a description of the
available configurations.
Continue with unpacking the equipment.
Table 2-1. Desktop Configurations
CONFIGURATION EQUIPMENT REQUIRED
M2488 M2488
IPM
Terminator (may be required)
AC Power Cable (110 or 220 VAC)
M2488 with ACL M2488
IPM
Terminator (may be required)
ACL
AC Power Cable (110 or 220 VAC)
Optional Support base for M2488 with ACL (5 or
10-cartridge size)
5 or 10-Cartridge Magazine
M2488 with FACL M2488
IPM
Terminator (may be required)
FACL
AC Power Cable (110 or 220 VAC)
7-Cartridge Magazine
Optional Support base for M2488 with FACL
To Next Page
Loading...
