M2488 USER’S GUIDE PARTS LIST
April 1997 CG00000-011403 REV. A 7-1
CHAPTER 7
PARTS LIST
7-1 INTRODUCTION
Chapter 7 provides parts information on the M2488 Cartridge Tape Drive and optional equipment as
described in the following paragraphs:
7-2 M2488 MODELS AND OPTIONS
7-2 M2488 MODELS AND OPTIONS
Table 7-1 describes the M2488 Cartridge Tape Drive models available. The Description column
describes all equipment that is included in that model/part number. Table 7-2 describes the optional
equipment available for use with the M2488 Cartridge Tape Drive.
Table 7-1. M2488 Models
MODEL PART NUMBER DESCRIPTION **
M2488C Cartridge Tape Drive CA01311-B002 Desktop drive
Requires one of options M2488A31 through A34, see
Table 7-2.
M2488CA Cartridge Tape Drive CA01311-B020 Desktop drive
ACL
Requires one of options M2488A31 through A34, see
Table 7-2.
M2488CF Cartridge Tape Drive CA01311-B030 Desktop drive
FACL
Requires one of options M2488A31 through A34, see
Table 7-2.
** All models are FJ Standard color.
Any of the IPMs listed in Table 7-2 may be used with the models listed in this table.
Table 7-2. Optional Equipment
MODEL PART NUMBER DESCRIPTION
M2488A31 IPM 1Kit CA01311-K031 IPM - Fast/Wide Single-ended
Terminator
M2488A32 IPM 2 Kit CA01311-K032 IPM - Fast/Wide Differential
Terminator
M2488A33 IPM 3Kit CA01311-K033 IPM - Narrow Single-ended
Terminator
M2488A34 IPM 4Kit CA01311-K034 IPM - Narrow Differential
Terminator
M2488A41 Support Base CA01311-K041 ACL Standard Option for 10 CTG Magazine (Models
M2488CA1 through CA4)
To Next Page
Loading...
