Fujitsu M2488 - Acoustic Noise; Storage Procedures; Table 1-7. Acoustic Noise Level Specifications; Table 1-8. Storage Environment

M2488 USER’S GUIDE INTRODUCTION
April 1997 CG00000-011403 REV. A 1-9
1-12 ACOUSTIC NOISE
The acoustic noise level specifications are described in Table 1-7.
Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991:
Der arbeitsplatzbezogens Schalldruckpegel beträgt 70 dB (A) oder weinger gemä ß ISO 7779
1-13 STORAGE PROCEDURES
Store all items in their original containers to provide protection from dust and damage. The storage
environment is described in Table 1-8.
* Magazines should not be stored at the maximum temperature or humidity for more than several
months. Do not leave the magazine in direct sunlight or near a very hot heat source, the magazine may
deform.
Tape Cartridges
Temperatures 5
°
to 32
°
C, 41
°
to 90
°
F
27
°
C maximum wet bulb temperature
Humidity 5 to 80%
Magazine
Temperatures 0
°
to 55
°
C, 32
°
to 131
°
F
Humidity 8 to 95%
Table 1-7. Acoustic Noise Level Specifications
SPECIFICATION MODE REQUIREMENT
Sound Pressure Level Stand-by <45dB (A)
Operating <50dB (A)
Sound Power Stand-by <6.0 B (A)
Operating <6.5 B (A)
Table 1-8. Storage Environment
ITEM TEMPERATURE HUMIDITY
Tape Cartridge 5
°
to 32
°
C, 41
°
to 90
°
F
27
°
C maximum wet bulb temperature
5 to 80%
Tape Drive 0
°
to 50
°
C, 32
°
to 122
°
F 8 to 95%
ACL 0
°
to 50
°
C, 32
°
to 122
°
F 8 to 95%
FACL 0
°
to 50
°
C, 32
°
to 122
°
F 8 to 95%
Magazine 0
°
to 55
°
C, 32
°
to 131
°
F * 8 to 95%
Table 1-6. Environmental Specifications (Continued)
SPECIFICATION REQUIREMENT